Set Home Add to Favorites contact us
xuzhou fenghe slewing bearing Co., Ltd.
home> News>Industry News

Rotary support preparation before installation

Created:2012-10-23 17:22:28                  Clicks:1910
Slewing bearing to buy back is needed after the installation, then the installation before we need which preparation to make?1, read the rotary support manual. Open the packaging and control the attached certificate and a rotary support plate, confirm with the selected model consistency.In 2, the mounting bracket must have enough rigidity to prevent the rotary bearing installation, because the support stiffness is insufficient, produce deformation causes the slewing bearing can not work normally.In 3, the installation plane must be clean, smooth, with no iron, burr or other debris, the plane must meet the following requirements of the form ( single-row slewing bearing mounted ), selection of high strength bolt.
Prev: Rotary support device maintenance measures
Next: Cautious rotary bearing maintenance cycle

CCTV network enterprise channels Xuzhou authority to provide technical support

Copyright © 2010 xuzhou fenghe slewing bearing Co., Ltd.苏ICP备09025193号-2

Link: 丰禾回转支承制造 | 百度 |   苏公网安备 32031202000232号